Dell PowerEdge 700 Скачать руководство пользователя страница 82

Страница: 82 / 94

Back to Contents Page

Getting Help

Dell™ PowerEdge™ 700 Systems Installation and Troubleshooting Guide

Technical Assistance

Dell Enterprise Training and Certification

Problems With Your Order

Product Information

Returning Items for Warranty Repair or Credit

Before You Call

Contacting Dell

Technical Assistance

If you need assistance with a technical problem, perform the following steps:

Complete the procedures in "

Troubleshooting Your System

Run the system diagnostics and record any information provided.

Make a copy of the

Diagnostics Checklist

, and fill it out.

Use Dell's extensive suite of online services available at Dell Support at

support.dell.com

for help with installation and troubleshooting procedures.

For more information, see "

Online Services

If the preceding steps have not resolved the problem, call Dell for technical assistance.

When prompted by Dell's automated telephone system, enter your Express Service Code to route the call directly to the proper support personnel. If
you do not have an Express Service Code, open the

Dell Accessories

folder, double-click the

Express Service Code

icon, and follow the directions.

For instructions on using the technical support service, see "

Technical Support Service

" and "

Before You Call

Online Services

You can access Dell Support at

support.dell.com

. Select your region on the

WELCOME TO DELL SUPPORT

page, and fill in the requested details to access

help tools and information.

You can contact Dell electronically using the following addresses:

World Wide Web

www.dell.com/

www.dell.com/ap/

(Asian/Pacific countries only)

www.dell.com/jp

(Japan only)

NOTE:

Call technical support from a phone near or at the system so that technical support can assist you with any necessary procedures.

NOTE:

Dell's Express Service Code system may not be available in all countries.

NOTE:

Some of the following services are not always available in all locations outside the continental U.S. Call your local Dell representative for

information on availability.

Содержание PowerEdge 700































































































Результаты поиска

Содержание PowerEdge 700

Отзывы:

Похожие инструкции для PowerEdge 700

Бренды по названию

Популярные бренды

Dell PowerEdge 700, Инструкция по установке и устранению неисправностей

Результаты поиска

Содержание PowerEdge 700

Отзывы:

Похожие инструкции для PowerEdge 700

Бренды по названию

Популярные бренды