Dell PowerEdge 4400, Руководство по установке

Страница: 9 / 42

support.dell.com Dell PowerEdge 4400 Systems—Activating the PERC 3/Di 1-5
DELL CONFIDENTIAL - Preliminary 1/14/00
(Rev. 11/3/98) FILE LOCATION: S:\SYSTEMS\opal\ts\Romb\8648Reb0.fm
Figure 1-5. Threading the Battery Cable Through the Clip
10. Connect the battery to the RAID battery connector (RAID_BTRY) on the system
board (see Figure 1-1).
11. Replace the cooling shroud and computer cover; reconnect the computer and
peripherals to their AC power sources and turn them on.
12. Install the RAID software.
For details, refer to the RAID controller documentation.
Changing the System Setup Settings
For more information on the System Setup program, see “Using the System Setup
Program” in your system
User’s Guide .
To enter the System Setup program, perform the following steps:
1. Turn on your system.
If your system is already on, shut it down and then turn it on again.
RAID battery
battery cable
clip