Specifications
Operating modes
•
Multiservice concurrent 802.11a/n + b/g/n WLAN
•
Can be configured to operate individually or simultaneously as:
- 802.11a/b/g/n access point
- Air monitor, spectrum monitor
- Remote AP
- Secure enterprise mesh
•
Backward compatible with 802.11a/b/g and mixed-mode
11a/b/g/n deployments
Radios
•
Multifunction, dual radio capable of 2.4-GHz and 5-GHz
operation
•
Both 802.11n radios implement 2x2 MIMO with two spatial
streams, providing up to 300 Mbps data rate per radio
•
Maximal ratio combining (MRC) for improved receiver
performance
Wireless radio specifications
•
Supported frequency bands (country-specific restrictions apply):
- 2.400 to 2.4835 GHz
- 5.150 to 5.250 GHz with Dynamic Frequency Selection
(DFS) capability
- 5.250 to 5.350 GHz with Dynamic Frequency Selection
(DFS) capability
- 5.470 to 5.725 GHz with Dynamic Frequency Selection
(DFS) capability
- 5.725 to 5.850 GHz with Dynamic Frequency Selection
(DFS) capability
•
Available channels: Controller-managed, dependent upon con-
figured regulatory domain
•
Transmit power:
- 2.4 GHz: Up to 23 dBm (limited by local regulatory
requirements)
- 5 GHz: Up to 23 dBm (limited by local regulatory
requirements)
- Transmit power configurable in increments of 0.5 dBm
•
Supported radio technologies:
- 802.11b: Direct-sequence spread-spectrum (DSSS)
- 802.11a/g/n: Orthogonal frequency division multiplexing
(OFDM)
- 802.11n: 2x2 MIMO with 2 spatial streams
•
Supported modulation types:
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
•
Association rates (Mbps):
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n: MCS0 - MCS15 (6.5 Mbps to 300 Mbps)
- 802.11n high-throughput (HT) support: HT 20/40
- 802.11n packet aggregation: A-MPDU, A-MSDU
Antenna
•
W-AP104:
- 4 x RP-SMA antenna interface connectors for external
antenna support. External Antenna selection guide is
available from Dell representative or downloadable from
Dell.com/wireless
•
W-AP105:
- 4 x integrated, omni-directional antennas.
- Maximum antenna gain:
- 2.4GHz/2.5dBi
- 5GHz /4.0dBi
Interfaces
•
Network:
- 1 x 10/100/1000Base-T Ethernet (RJ45), auto-sensing,
MDI/MDX
•
Power:
- 1 x DC power connector
•
Other:
- 1 x RJ45 console interface
Power options
•
48V DC 802.3af PoE or 802.3at PoE+
•
External AC power providing 12V DC to AP (adapter sold
separately)
•
Maximum power consumption: 12.5 watts
Mounting
•
Ceiling tile rail (15/16” & 9/16” recessed or non-recessed)
•
Desk stand and wall outlet mount plate
•
Wall box mount bracket (for US single gang wall mount)
•
Solid wall stand-off
Mechanical
•
132 mm x 135 mm x 45 mm (5.2” x 5.3” x 1.8“)
•
Weight: 300g (10.56 oz)
Certifications/Regulatory
•
Wi-Fi certified: 802.11a/b/g/n
•
FIPS/TAA certified SKU available
Product meets EMC, safety and wireless standards of over 50
countries inclusive of; USA (FCC), Canada, EU, Japan, Korea,
China. For more country-specific regulatory information, and
approvals, please see your Dell representative.
Minimum AOS version
•
W-AP104: 6.1.3.0
•
W-AP105: 5.0.2.0
Extended Life Warranty*
Dell_PowerConnect_WAP104_AP105 page 2
