Dell PowerConnect J-EX8208, Руководство пользователя программного обеспечения

Страница: 1925 / 3660

Table 225: show isis interface Output Fields (continued)
Level of Output Field Description Field Name
detail Router responsible for sending network link-state advertisements, which describe
all the routers attached to the network. Designated Router
extensive
Type of hello padding:
•
Adaptive —On point-to-point connections, the hello packets are padded from
the initial detection of a new neighbor until the neighbor verifies the adjacency
as Up in the adjacency state TLV. If the neighbor does not support the
adjacency state TLV, then padding continues. On LAN connections, padding
starts from the initial detection of a new neighbor until there is at least one
active adjacency on the interface.
•
Loose
—(Default) The hello packet is padded from the initial detection of a
new neighbor until the adjacency transitions to the Up state.
•
Strict
—Padding is performed on all interface types and for all adjacency
states, and is continuous.
Hello padding
extensive
Current LDP synchronization state:
in sync
,
in holddown
, or
not supported
.
LDP sync state
extensive Reason for being in the LDP sync state. reason
extensive
Configured value of the hold timer.
config holdtime
extensive If the state is not in sync and the hold time is not infinity, then this field displays
the number of seconds remaining. remaining
show isis interface
user@host> show isis interface
IS-IS interface database:
Interface L CirID Level 1 DR Level 2 DR L1/L2 Metric
show isis interface
at-2/3/0.0 3 0x1 Point to Point Point to Point 10/10
lo0.0 0 0x1 Passive Passive 0/0
show isis interface
brief
The output for the
show isis interface brief
command is identical to that for the
show isis
interface
command. For sample output, see show isis interface on page 1853 .
show isis interface
detail
user@host> show isis interface detail
IS-IS interface database:
at-2/3/0.0
Index: 66, State: 0x6, Circuit id: 0x1, Circuit type: 3
LSP interval: 100 ms, CSNP interval: 5 s
Level Adjacencies Priority Metric Hello (s) Hold (s) Designated Router
1 1 64 10 9.000 27
2 1 64 10 9.000 27
lo0.0
Index: 64, State: 0x6, Circuit id: 0x1, Circuit type: 0
LSP interval: 100 ms, CSNP interval: disabled
Level Adjacencies Priority Metric Hello (s) Hold (s) Designated Router
1 0 64 0 Passive
2 0 64 0 Passive
show isis interface
extensive
user@host>
show isis interface extensive
1853
Chapter 74: Operational Commands for Layer 3 Protocols