Dell P80G, Руководство по обслуживанию

Страница: 83 / 131

Steps
1. Locate the heatsink slot on your computer.
2. Align and place the heatsink fan on to the heatsink assembly.
3. Install the single (M2x5) screw that secures the heatsink fan to the heatsink assembly.
4. Align and place the heatsink assembly into the slot of your computer.
5. Install the two (M2x5) and six (M2x3) to secure the heatsink assembly to the computer.
NOTE: Install the screws as per the callout on the heatsink.
6. Connect the heatsink fan cable on to the connector on the system board.
Next steps
1. Install the battery .
2. Install the base cover .
3. Follow the procedure in After working inside your computer .
System board
Removing the system board
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the base cover .
3. Remove the battery .
4. Remove the solid state drive .
5. Remove the HDD .
6. Remove the WLAN card .
7. Remove the WWAN card .
8. Remove the inner frame .
9. Remove the heat sink .
10. Remove the memory module .
About this task
The figure indicates the location of the system board and provides a visual representation of the removal procedure.
Disassembly and reassembly 83