manualshive.com logo in svg

Dell P2422HE, Руководство пользователя

Поделиться
Скачать
Dell P2422HE Скачать руководство пользователя страница 55

Operating the monitor 

│

  55

Lock

With the control buttons on the monitor locked, you 
can prevent people from accessing the controls. It 
also prevents accidental activation in multiple 
monitors side-by-side setup. 

•

Menu Buttons

: All joystick functions are locked 

and not accessible by the user.

•

Power Button

: Only the Power button is locked 

and not accessible by the user.

•

Menu + Power Buttons

: Both the joystick & 

Power button are locked and not accessible by the 
user.

The default setting is 

Disable

. 

Alternative Lock Method: You can move and hold the 
joystick up/down/left/right for 4 seconds to set the 
lock options via the pop-up menu, and then press the 
joystick to confirm the configuration.

NOTE: 

To unlock the button(s), move and hold the 

joystick up/down/left/right for 4 seconds, and then 
press the joystick to confirm the changes and close 
the pop-up menu.

Reset Menu

Resets all OSD settings to the factory preset values.

Содержание P2422HE

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды