5. Disassembly and Assembly Procedures
Connect LVDS cable to the connector of panel. Use
a Philips-head screwdriver to tighten 2pcs screws for
locking the bracket with the panel.
(No.1~2 screw size=M3x2.8, Torque=4
~5
kgfxcm)
Connect the function key cable to the connector of
the board. Fix the function key cable with adhesive
tapes on the back of the cable.
Connect the panel lamp cable to the connector of
the panel, locate the cable into the hooks of the
middle bezel, then stick 2pcs aluminum foil to fix the
bracket chassis base as the picture below shown.
aluminum foil
Take a function key board and a middle bezel, then
fix the middle bezel with a fixture, and locate the
function keyboard into the hooks of the bezel Use a
Philips-head screwdriver to tighten 3pcs screws for
locking the function key board with the middle bezel ,
then assemble the middle bezel with the front bezel.
.
(No.1~3 screw size=M2x2.4, Torque=0.8
±
0.2kgfxcm
aluminum foil
S8
S11
S12
3
1
2
Adjust the middle bezel , then use a Philips-head
screwdriver to tighten 13pcs screws for locking the
middle bezel with the assembled unit.
(No.1~11 screw size=M3x4, Torque=3
~4
kgfxcm;
No.12~13 screw size=M1.6x1.7, Torque=0.6
~1
kgfxcm)
2
10
4
1
11
S9
3
8
6
5
9
7
S10
2
1
12
13
