Dell P2222H, Руководство по обслуживанию

Страница: 9 / 17

5. Disassembly and Assembly Procedures
Take a mylar to insert the hooks of the bracket to
cover the power board.
Panel preparation: Examine the panel surface
according to inspection criteria. Turn over the panel
to place the screen faced down for later assembling.
Turn over a power board and put the power board
into the bracket chassis, locate the panel power
cable into the hook of the bracket chassis.
Place a bracket chassis base on a protective
cushion.
5.2 Assembly Procedures:
S2
S1
Take a interface board, connect a LVDS cable to the
connector of the interface board, then connect the
cable of the power board to the connector of the
interface board. Turn over the interface board and
locate it into the bracket. Use a Philips-head
screwdriver to tighten 5pcs screws for locking the
power board and interface board.
(No.1~4 screw size=M3x7.5, Torque=6
±0.5
kgfxcm;
No.5 screw size=M4x8, Torque=6
±0.5
kgfxcm)
S3
Put the bracket chassis module on the back of LCD
module, then connect LVDS cable and panel lamp
cable to the connectors of the panel module.
3
6
4
1
2
Use a Hex-head screwdriver to tighten 2pcs screws
for locking the D-Sub connector.
(No.1~2 screw size=M3x8, Torque=6 ±0.5 kgfxcm)
2
1
S4
S6
S5
S7