2 Dell P1130 Color Monitor Quick Setup Guide
Monitor Controls and Indicators
1
These buttons are used to make adjustments to the monitor in the desired menu items.
2
These buttons display the CONTRAST ( ) /BRIGHT (
) menu. These buttons are also used to navigate the menu.
3
This button is used to display the main menu on your screen. This button is also used to select the menu items and to
activate the adjustment.
4
This button selects the INPUT 1 (video input 1 connector:
y
1) or INPUT 2 (video input 2 connector:
y
2) video input
signal.
5
This button switches the power on and off. The LED indicator lights up in green when the monitor is turned on, and
lights up in amber when the monitor is in power saving mode. If the monitor is in the power save mode and the power
is turned off with the power switch, it may take up to 10 seconds for the LED to go black.
Driver Installation
Use the monitor CD to install the appropriate monitor driver for your operating system.
The following OS messages might be slightly different from the actual message that appears on your PC, but the meaning
is the same.
Microsoft
®
Windows
®
XP Operating System
To manually install or update the driver, perform the following steps:
1.
Insert the monitor CD into the CD-ROM drive.
2.
Click
Start --> Control Panel --> Appearance & Themes
and then click the Display icon.
3.
In the
Display Properties
window, click the
Settings
tab and then click
Advanced
.
4.
Click the
Monitor
tab, and then click
Properties --> Driver
tab
--> Update Driver
.
5.
When the
Hardware Update Wizard
dialog box appears, choose “Install the software automatically,” and click
Next>
and the
Finish
to complete the installation.
6.
Close the
Display Properties
window.
Microsoft
®
Windows
®
Millennium Operating System
To manually install or update the driver, perform the following steps:
1.
Click
Start-->
Settings--> Control Panel
and then double-click
Display.
2.
In the
Display Properties
window, click the
Settings
tab, and then click
Advanced
.
3.
Click the
Monitor
tab, and then click
Change--> Specify the location of the driver-->Next
.
4.
When the
Update Device Driver Wizard
dialog box appears, select “Display a list of all the drivers in a specific
location, so you can select the driver you want,” and click
Next>
.
5.
Insert the monitor CD into the CD-ROM drive, then click
Have Disk...
6.
Type
d:\
(change the drive letter to match your CD-ROM drive if it is not drive D) in the
Copy manufacturer’s files
from:
box, then click
OK
.
7.
Click
Next>
,
Next>
, and then
Finish
to complete the installation.
8.
Close the
Display Properties
window.
01GB02CON-AEP.p65
8/8/01, 2:43 PM
2
