Dell P104F, Руководство по обслуживанию

Страница: 29 / 113

Installing the M.2 2280 solid-state drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
NOTE: Slot 2 can only support M.2 Gen 4 PCIe x4 NVMe solid-state drive. You can refer the below procedure to install the
M.2 2280 solid-state drive in both SLOT 1 and SLOT 2.
The following image indicates the location of the M.2 2280 solid-state drive and provides a visual representation of the
installation procedure.
Steps
1. Remove the solid-state drive holder from the system board if required.
2. Align the notch on the solid-state drive with the tab on the solid-state drive slot.
3. Slide the M.2 2280 solid-state drive into the solid-state drive slot on the system board.
4. Replace the screw (M2x4) that secures the M.2 2280 solid-state drive to the system board.
Next steps
1. Install the base cover .
2. Install the microSD card .
3. Install the SIM card .
4. Follow the procedure in After working inside your computer .
Removing the M.2 2230 solid-state drive
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the SIM card .
3. Remove the microSD card .
4. Remove the base cover .
Removing and installing components 29