Dell OptiPlex GX1, Руководство по обслуживанию

Страница: 169 / 178

System Setup Program A-7
'HYLFH/LVW
Device List provides access to the Device List screen where you can choose
from a list of available boot devices to boot from and specify the order in which
your computer attempts to boot from these devices. To view the Device List
screen, press <Ctrl> and the right-arrow key.
&$87,212QO\DWHFKQLFDOO\NQRZOHGJHDEOHSHUVRQVKRXOGFKDQJH
WKHVHWWLQJVLQWKH'HYLFH/LVWVFUHHQ
The Device List screen (see Figure A-2) provides three categories for listing
and prioritizing the available boot devices in your system:
‡
Boot Device Priority
‡
Exclude From Boot Device Priority
‡
Device Controller Priority
The Boot Device Priority category lists all bootable devices (hard-disk drives,
CD-ROM drives, and so on) that are controlled by the system BIOS and any
Plug and Play network adapters installed in the computer.
The Exclude From Boot Device Priority category allows you to remove from the
Boot Device Priority category any boot devices that you want the system to
ignore during system start-up.
The Device Controller Priority category lists the system BIOS controller; any
non-Plug and Play devices, such as network adapter cards; and any secondary
controller cards, such as a SCSI adapter, installed in the computer.
NOTE: Non-Plug and Play devices appear in this list as
$GDSWHUVZLWKRXW
,'VXSSRUW
.
When determining the order of devices to boot from, the system first consid-
ers the order of the devices listed under the Device Controller Priority
category, then the order of devices under Boot Device Priority.
To specify your priority preferences, order the devices under these categories
so that the highest-priority controller is at the top of the Device Controller Pri-
ority category and the highest-priority device is at the top of the Boot Device
Priority category. Order the remainder of the devices in the Boot Device Prior-
ity category according to your preferences. Move any devices that you want
the system to ignore during system start-up into the Exclude From Boot
Device Priority category.
NOTE: The system defines Hard Drive C: in the Boot Device Priority category
as the first hard-disk drive attached to the highest-priority device controller.
Therefore, if you have a SCSI adapter installed in your computer and you want
the SCSI drive 0 to be drive C, you must move the SCSI adapter item to the top
of the Device Controller Priority category.
To change the order of the devices, press <Ctrl> and the up- or down-arrow
key. If you want to revert to the original Boot Device Priority category settings,
press <Ctrl><Del>.