Dell OptiPlex G1, Обновление документации

Страница: 17 / 22

Dell OptiPlex G1 Managed PC Systems Documentation Update13
workstations in an office environment, you should create a set of program diskettes
using the Dell Program Diskette Maker. The program diskettes contain installation pro-
grams for the drivers and utilities needed by your system. To access the Program
Diskette Maker, click the Start button and point to Programs . Then point to Dell
Accessories and click Program Diskette Maker . If your computer is part of a centrally
managed network, check with your network administrator for information on reinstall-
ing drivers and utilities.
If you are a network administrator and you received the Network Administrator’s Kit,
Dell provided, as part of the kit, drivers and utilities for Windows 95 on diskettes.
Normally, you should install the drivers on the managing server and then use Intel
LANDesk
®
Configuration Manager to download and install the drivers on an
OptiPlex G1 Managed PC system. See your online Network Administrator’s Guide for
information on downloading and installing drivers over the network.
To reinstall DirectX drivers locally on a system with a diskette drive, follow these
steps:
1. If you have not done so already, create a program diskette set of drivers as
described in the introduction to this procedure. Or, if you received the Network
Administrator’s Kit, locate the diskettes containing drivers and utilities.
2. If you reinstalled Windows 95, make sure Universal Serial Bus (USB) support was
reinstalled along with the operating system.
USB support is enabled when Windows 95 is installed by Dell. However, if you
need to reinstall the operating system, USB support should also be reinstalled.
See your online Reference and Installation Guide or Network Administrator’s
Guide for more information.
3. Save any work and close all application programs, because you will need to
restart the computer at the end of this procedure to complete the installation.
4. Insert the DX5 Drivers Diskette 1 into the diskette drive.
5. Click the
Start
button and then click
Run
.
6. Type D?VHWXSH[H and click OK .
7. Follow the instructions on your screen, and insert the DX5 Drivers Diskette 2
when prompted.
When the setup.exe program is completed, a message prompting you to run
another program appears.
8. Click the Start button and then click Run . Type F?ZLQGRZV?G[FRUHH[H
and click OK .
9. Follow the instructions on your screen to complete the DirectX drivers installa-
tion, and restart the system when prompted.
10. After the system restarts, insert the video drivers diskette into the diskette drive.
11. Click the
Start
button and then click
Run
.