Dell OptiPlex 7440 All-In-One W11C Скачать руководство пользователя | Manualshive

Страница: 66 / 80

background image

Option

Description

Boot List Options

Allows you to change the boot list option:

•

Legacy

•

UEFI (enabled by default)

Advanced Boot
Options

This option allows you the legacy option ROMs to load. By default, the

Enable Legacy Option ROMs

is disabled.

•

Restore Settings - Restores the default settings of the computer

•

Save Settings - Saves the settings of the computer

•

Apply - Enables you to apply the settings

•

Exit - Exits and starts the computer

Date/Time

Allows you to change the date and time.

System configuration screen options

Option

Description

Integrated NIC

If you enable UEFI network stack, UEFI network protocols will be available. UEFI network allows pre-os and early
os networking features to use NICs that are enabled. This may be used without PXE turned on. When you enable
Enabled w/PXE, the type of PXE boot (Legacy PXE or UEFI PXE) depends on the current boot mode and type of
option ROMs in use. The UEFI Network Stack is required in order to have UEFI PXE functionality fully enabled.

•

Enabled UEFI Network Stack - This option is disabled by default.

Allows you to configure the integrated network controller. The options are:

•

Disabled

•

Enabled

•

Enabled w/PXE: This option is enabled by default.

•

Enabled w/Cloud Desktop

NOTE:

Depending on the computer and its installed devices, the items listed in this section may or

may not appear.

SATA Operation

Allows you to configure the internal SATA hard-drive controller. The options are:

•

Disabled

•

AHCI

•

RAID On: This option is enabled by default.

Drives

Allows you to configure the SATA drives on board. All drives are enabled by default. The options are:

•

SATA-0

•

SATA-1

•

SATA-4

•

M.2 PCIe SSD-0

SMART Reporting

This field controls whether hard drive errors for integrated drives are reported during system startup. This
technology is part of the SMART (Self Monitoring Analysis and Reporting Technology) specification. This option is
disabled by default.

•

Enable SMART Reporting

USB Configuration

This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any
type of USB Mass Storage Devices (HDD, memory key, floppy).

If USB port is enabled, device attached to this port is enabled and available for OS.

If USB port is disabled, the OS cannot see any device attached to this port.

The options are:

•

Enable USB Boot Support

•

Enable Rear USB Ports: Include options for 6 ports

66

System setup

«
...
64
65
66
67
68
...
»

Содержание OptiPlex 7440 All-In-One W11C

















































































Отзывы:

Нет отзывов

Похожие инструкции для OptiPlex 7440 All-In-One W11C

Бренд: Tandy Страницы: 493

Бренд: IBM Страницы: 27

Бренд: Aaeon Страницы: 64

Бренд: Lenovo Страницы: 54

Бренд: Lenovo Страницы: 64

Бренд: Lenovo Страницы: 4

Бренд: Lenovo Страницы: 84

Бренд: Lenovo Страницы: 2

Бренд: Lenovo Страницы: 4

Бренд: Lenovo Страницы: 102

Бренд: Lenovo Страницы: 56

Бренд: Lenovo Страницы: 92

Бренд: Lenovo Страницы: 4

415539U - Ts D20 Twr X/2.26 4Gb 500Gb Dvdr Wvb64

Бренд: Lenovo Страницы: 70

Бренд: Lenovo Страницы: 76

Бренд: Lenovo Страницы: 60

30141DU - IdeaCentre Q100 Mini PC

Бренд: Lenovo Страницы: 72

Бренд: Lenovo Страницы: 65

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды