Dell OptiPlex 7040 - Mini Tower Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 53

Dell OptiPlex 7040 - Mini Tower Скачать руководство пользователя страница 40

Option

Description

NOTE: The system will always prompt for the system and internal HDD
passwords when powered on from the off state (a cold boot). Also, the
system will always prompt for passwords on any module bay HDDs that
may be present.

Password Change

This option lets you determine whether changes to the System and Hard
Disk passwords are permitted when an administrator password is set.

Allow Non-Admin Password Changes

- This option is enabled by default.

TPM 1.2 Security

Allows you to control whether the Trusted Platform Module (TPM) is visible
to the operating system.
• TPM On (default)
• Clear
• PPI Bypass for Enable Commands
• PPI Bypass for Disable Commands
• Disabled
• Enabled (default)

Computrace

This field lets you Activate or Disable the BIOS module interface of the
optional Computrace Service from Absolute Software. Enables or disables
the optional Computrace service designed for asset management.
•

Deactivate

- This option is disabled by default.

• Disable
• Activate

Chassis Intrusion

Allows you to control the chassis intrusion feature. You can set this option

to:
• Enable
• Disable
•

On-Silent

— Enabled by default if chassis intrusion is detected.

CPU XD Support

Allows you to enable or disable the Execute Disable mode of the processor.

This option is enabled by default.

OROM Keyboard Access

This option determines whether users are able to enter Option ROM

Configuration screens via hotkeys during boot. Specifically, these settings
are capable of preventing access to Intel RAID (CTRL+I) or Intel
Management Engine BIOS Extension (CTRL+P/F12)
•

Enable

— User may enter OROM configuration screens via the hotkey.

•

One-Time Enable

— User may enter OROM configuration screens via

the hotkeys on next boot only. After next boot, the setting will revert to

disabled.

•

Disable

— User may not enter OROM configuration screens via the

hotkey.

This option is set to Enable by default.

Admin Setup Lockout

Allows you to enable or disable the option to enter Setup when an

Administrative password is set. This option is not set by default.

40

«
...
38
39
40
41
42
...
»

Содержание OptiPlex 7040 - Mini Tower






















































Отзывы:

Нет отзывов