manualshive.com logo in svg

Dell OptiPlex 5480 All-in-One, Руководство по обслуживанию

Поделиться
Скачать
Dell OptiPlex 5480 All-in-One Скачать руководство пользователя страница 68

Steps

1. Align the screw holes on the system board with the screw holes on the display-assembly base.
2. Replace the nine screws (M3x5) to secure the system board to the display-assembly base.
3. Connect the camera cable to the connector on the system board.
4. Connect the touchscreen cable to the connector on the system board.
5. Connect the system fan cable to the connector on the system board.
6. Connect the microphone-module cable to the connector on the system board.
7. Connect the SIO-signal cable to the connector on the system board.
8. Connect the speaker cable to the connector on the system board.
9. Connect the audio-board cable to the connector on the system board.
10. Connect the SIO-power cable to the connector on the system board.
11. Connect the display cable to the connector on the system board.
12. Connect the power-button board cable to the system board and close the latch to secure the cable.
13. Connect the display back-light cable to the connector on the system board.
14. Connect the PSU-fan cable to the system board.
15. Connect the PSU cable to the system board.

Next steps

1. Install the 

rear-I/O bracket

.

2. Install the 

bottom cover

.

3. Install the 

coin-cell

.

4. Install the 

processor

.

5. Install the 

heat-sink

.

6. Install the 

M.2 2230 solid-state drive/Intel Optane

.

7. Install the 

M.2 2230 solid-state drive

.

8. Install the 

hard drive

.

9. Install the 

wireless card

.

10. Install the 

memory module

.

11. Install the 

system-board shield

.

12. Install the 

back cover

13. Install the 

cable cover

 (optional).

14. Install the 

stand

.

15. Follow the procedure in 

After working inside your computer

.

NOTE:

 Your computer’s Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup

program after you replace the system board.

NOTE:

 Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program.

You must make the appropriate changes again after you replace the system board.

Speakers

Removing the speakers

Prerequisites

1. Follow the procedure in 

Before working inside your computer

.

2. Remove the 

stand

.

3. Remove the 

cable cover

 (optional).

4. Remove the 

back cover

.

5. Remove the 

system-board shield

.

6. Remove the 

bottom cover

.

7. Remove the 

rear-I/O bracket

.

68

Removing and installing components

Содержание OptiPlex 5480 All-in-One







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды