Installing the Power Supply Unit (PSU)
1
Place the PSU on the chassis.
2
Tighten the screw to secure the PSU to the chassis.
3
Place the power supply socket in the slot on the chassis.
4
Tighten the screw to secure the power supply socket to the chassis.
5
Secure the power supply cable on the retention clips in the chassis.
6
Connect the power supply cables to the connectors on the system board.
7
Install the:
a
b
c
d
e
8
Follow the procedure in
After working inside your computer
.
VESA mount bracket
Removing the VESA mount bracket
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
c
d
e
f
3
To remove the VESA mount bracket:
a Remove the screws that secure the VESA mount bracket to the computer [1].
b Lift the bracket away from the computer [2].
32
Извлечение и установка компонентов
Содержание OptiPlex 5250
Страница 1: ...Dell OptiPlex 5250 All In One Owner s Manual Regulatory Model W14B Regulatory Type W14B002 ...
Страница 41: ...4 Remove the screws that secure the system board to the chassis Извлечение и установка компонентов 41 ...
Страница 42: ...5 Slide and lift the system board to remove it from the computer 42 Извлечение и установка компонентов ...
Страница 70: ...70 Поиск и устранение неполадок ...
