Installing the stand
1
Align the stand and slide it on the back of the computer.
2
Press the stand down till it snaps in.
3
Follow the procedure in
After working inside your computer
.
Cable cover
Removing the cable cover
1
Follow the procedure in
Before working inside your computer
.
2
Remove the
.
3
To remove the cable cover:
a Remove the screw that secures the cable cover to the computer [1].
b Push the release tabs to release the cable cover [2].
c Lift the cable cover away from the computer [3].
Installing the cable cover
1
Align the notches on the cable cover to the holes on the computer and press the cable cover until it snaps in.
2
Tighten the screw to secure the cable cover to the computer.
3
Install the
.
Извлечение и установка компонентов
11
Содержание OptiPlex 5250
Страница 1: ...Dell OptiPlex 5250 All In One Owner s Manual Regulatory Model W14B Regulatory Type W14B002 ...
Страница 41: ...4 Remove the screws that secure the system board to the chassis Извлечение и установка компонентов 41 ...
Страница 42: ...5 Slide and lift the system board to remove it from the computer 42 Извлечение и установка компонентов ...
Страница 70: ...70 Поиск и устранение неполадок ...
