Dell OptiPlex Micro Cable Cover
The cable cover for the OptiPlex 5080 Micro system protects the ports and organize cables that are connected to the system
unit.
Steps
1. Follow the instructions in
.
2.
NOTE:
Images that are shown below may vary depending on your system configuration.
Remove the thumbscrew and the cable clip from the rear of the system unit.
3. Align the rear bracket along with the cable clip to the back of the system.
4. Use the thumbscrew to secure the rear bracket along with cable clip to the back of the system.
5. Route the cables through the slot on the cable cover and connect the cables to their respective ports.
6. Turn the antenna outwards to pass through the antenna slot at the top of the cable cover.
2
Dell OptiPlex Micro Cable Cover
5
