Back to Contents Page
Memory
Dell™ OptiPlex™ 380 Service Manual—
Mini-Tower
Removing the Memory Module(s)
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Push down on the memory retention clips to release the memory module.
3.
Lift the memory module out of its connector on the system board and remove it from the computer.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Содержание OptiPlex 380
Страница 22: ...6 Tilt the I O panel toward the back of the computer 7 Lift the I O panel out of the slot ...
Страница 23: ...8 Disconnect the data cable from the I O panel 9 Remove the I O panel from the computer ...
Страница 42: ...7 Disconnect the system board power cable 8 Disconnect the optical drive data cable from the system board ...
