Dell OptiPlex 3090 Ultra Скачать руководство пользователя страница 134 | Manualshive

Страница: 134 / 140

Dell OptiPlex 3090 Ultra Скачать руководство пользователя страница 134

5. Restart the computer and press

F12

.

6. Select the USB drive from the

One Time Boot Menu

.

7. Type the BIOS setup program filename and press

Enter

.

The

BIOS Update Utility

appears.

8. Follow the on-screen instructions to complete the BIOS update.

Updating the BIOS from the F12 One-Time boot menu

Update your computer BIOS using the BIOS update.exe file that is copied to a FAT32 USB drive and booting from the F12
One-Time boot menu.

About this task

CAUTION:

If BitLocker is not suspended before updating the BIOS, the next time you reboot the system it

will not recognize the BitLocker key. You will then be prompted to enter the recovery key to progress and the
system will ask for this on each reboot. If the recovery key is not known this can result in data loss or an
unnecessary operating system re-install. For more information on this subject, see Knowledge Article:

www.dell.com/support/article/sln153694

BIOS Update

You can run the BIOS update file from Windows using a bootable USB drive or you can also update the BIOS from the F12
One-Time boot menu on the computer.

Most of the Dell computers built after 2012 have this capability, and you can confirm by booting your computer to the F12
One-Time Boot Menu to see if BIOS FLASH UPDATE is listed as a boot option for your computer. If the option is listed, then the
BIOS supports this BIOS update option.

NOTE:

Only computers with BIOS Flash Update option in the F12 One-Time boot menu can use this function.

Updating from the One-Time boot menu

To update your BIOS from the F12 One-Time boot menu, you need the following:

●

USB drive formatted to the FAT32 file system (key does not have to be bootable)

●

BIOS executable file that you downloaded from the Dell Support website and copied to the root of the USB drive

●

AC power adapter that is connected to the computer

●

Functional computer battery to flash the BIOS

Perform the following steps to perform the BIOS update flash process from the F12 menu:

CAUTION:

Do not turn off the computer during the BIOS update process. The computer may not boot if you turn

off your computer.

Steps

1. From a turn off state, insert the USB drive where you copied the flash into a USB port of the computer.
2. Turn on the computer and press F12 to access the One-Time Boot Menu, select BIOS Update using the mouse or arrow keys

then press Enter.
The flash BIOS menu is displayed.

3. Click

Flash from file

.

4. Select external USB device.
5. Select the file and double-click the flash target file, and then click

Submit

.

6. Click

Update BIOS

. The computer restarts to flash the BIOS.

7. The computer will restart after the BIOS update is completed.

134

System setup

«
...
132
133
134
135
136
...
»

Содержание OptiPlex 3090 Ultra













































































































































Отзывы:

Нет отзывов