Dell NSA E8500, Руководство по началу работы

Страница: 32 / 74

Initial Setup | 32
Connecting to Your Network
The Dell SonicWALL NSA E8500 ships with the internal DHCP
server active on the LAN port. However, if a DHCP server is
already active on your LAN, the NSA E8500 will disable its own
DHCP server to prevent conflicts.
As shown in the illustration on this page, ports X1 and X0 are
preconfigured as WAN and LAN respectively. The remaining
ports (X2-X7) can be configured to meet the needs of your
network. In the graphical example on this page, the zones are:
X1: WAN, X0: LAN, X2: WLAN, X7: DMZ.
The above example is only for reference, your own port to zone
assignments depend on your networking goals and needs.
Refer to the
SonicOS Administrator’s Guide for more advanced
configuration deployments.
Testing Your Connection
1. After you exit the Setup Wizard, the login page reappears.
Log back into the Management Interface and verify your IP
and WAN connection.
2. Ping a site outside of your local network, such as:
www.sonicwall.com
3. Open another Web browser and navigate to:
www.sonicwall.com
If you can view the Dell SonicWALL home page, you have
configured your Dell SonicWALL NSA E8500 correctly.
If you cannot view the Dell SonicWALL home page, renew
your management station DHCP address.
4. If you still cannot view a Web page, try one of these
solutions:
•
Restart your Management Station to accept new
network settings from the DHCP server in the Dell
SonicWALL security appliance.
• Restart your Internet Router to communicate with the
DHCP Client in the Dell SonicWALL security appliance.
E8500 Network Security Appliance
SonicPoint
LAN Zone
SonicWALL NSA E8500
DMZ Zone
WLAN Zone
X1
X0
X2
X7
Internet