14
Cisco Nexus B22 Fabric Extender for Dell Getting Started Guide
Configuring the Cisco Nexus B22 Fabric Extender for Dell
This example shows how to redistribute the host interfaces on a Fabric Extender:
switch#
fex pinning redistribute 100
Caution
The
fex pinning redistribute
command disrupts all the host interface ports of the Fabric Extender.
For additional information about configuring the Cisco Nexus B22 Fabric Extender for Dell and parent
Cisco Nexus Switches, see the following documentation:
•
Cisco Nexus 2000 Series Fabric Extender Software Configuration Guide
http://www.cisco.com/en/US/products/ps10110/tsd_products_support_configure.html
•
Cisco Nexus 5000 Series NX-OS Software Configuration Guide
http://www.cisco.com/en/US/products/ps9670/tsd_products_support_configure.html
Displaying Fabric Extender Information
This section describes the
show
commands that are available to display the configuration and status of
the Fabric Extender and includes the following topics:
•
Displaying Configuration Information, page 14
•
Displaying Chassis Management Information, page 16
Displaying Configuration Information
To display configuration information about the defined interfaces, perform one of these tasks:
This example shows how to display all the attached Fabric Extender units:
switch(config-fex)#
show fex
FEX FEX FEX FEX
Number Description State Model Serial
------------------------------------------------------------------------
100 FEX0100 Online N2K-B22DELL-P FOC1516ZZLS
switch(config-fex)#
This example shows how to display the detailed status of a specific Fabric Extender:
N5596-2-Dell#
show fex 160 detail
FEX: 160 Description: FEX0160 state: Online
FEX version: 5.2(1)N1(3) [Switch version: 5.2(1)N1(3)]
FEX Interim version: 5.2(1)N1(3)
Switch Interim version: 5.2(1)N1(3)
Extender Serial: FOC1625R0JK
Extender Model: N2K-B22DELL-P, Part No: 73-14668-02
Command
Purpose
switch#
show fex
[
FEX Number
[
detail
]
Displays information about a specific Fabric
Extender or all attached units.
switch#
show interface
type
number
fex-intf
Displays the Fabric Extender ports pinned to a
specific switch interface.
switch#
show interface
fex-fabric
Displays the switch interfaces that have detected a
Fabric Extender uplink.
