Dell Networking S6000 System, Справочное руководство

Страница: 874 / 1510

Column Heading Description
(Sticky). An (N) indicates that the specified MAC address has
been learnt by a neighbor and is synced to the node.
Interface Displays the interface type and slot/port information. The
following abbreviations describe the interface types:
• gi — Gigabit Ethernet followed by a slot/port
• po — Port Channel followed by a number. Range for
Terascale is from 1 to 255. \
• so — Sonet followed by a slot/port.
• te — 10–Gigabit Ethernet followed by a slot/port.
State Lists if the MAC address is in use (Active) or not in use
(Inactive).
The following describes the
show mac-address-table count
command shown
in the following example.
Line Beginning
With Description
MAC Entries... Displays the number of MAC entries learned per VLAN.
Dynamic
Address... Lists the number of dynamically learned MAC addresses.
Static Address... Lists the number of user-defined MAC addresses.
Total MAC... Lists the total number of MAC addresses the switch uses.
Example
(Count)
Dell# show mac-address-table count
MAC Entries for all vlans :
Dynamic Address Count : 110
Static Address (User-defined) Count : 0
Sticky Address Count : 0
Total Synced Mac from Peer(N): 100
Total MAC Addresses in Use: 110
Dell#
Related
Commands show mac-address-table aging-time — displays MAC aging time.
show mac-address-table aging-time
Display the aging times assigned to the MAC addresses on the switch.
S6000
Syntax
show mac-address-table aging-time [vlan vlan-id ]
Parameters
vlan vlan-id (OPTIONAL) Enter the keyword
vlan
then the VLAN ID to
display the MAC address assigned to the VLAN. The range is
from 1 to 4094.
874
Layer 2