Dell N1100-ON, Справочное руководство

Страница: 406 / 2332

Layer 2 Switching Commands
406
---- --------------------------------- -----------
Forbidden VLANS:
VLAN Name
---- ---------------------------------
Port Gi1/0/1 Enabled
State: Disabled Role: Disabled
Port id: 128.1 Port Cost: 0
Port Fast: No (Configured: no ) Root Protection: No
Designated bridge Priority: 32768 Address: 1418.7715.2368
Designated port id: 0.0 Designated path cost: 0
CST Regional Root: 80:00:14:18:77:15:23:68 CST Port Cost: 0
BPDUs: Sent: 0, Received: 0
show interfaces status
Use the show interfaces status command to display the status for all
configured interfaces.
Syntax
show interfaces status
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
Port channels are only displayed if configured. Use the show interfaces port-
channel command to display configured and unconfigured port channels.
Interfaces configured as stacking ports will show as detached in the output of
the show interfaces status command.
The link state indicates the physical connectivity state of the link. It is
possible that the link is connected physically yet frames are not able to pass
over the link. Possible causes of this condition are speed or duplex mismatch.
The displayed port status information includes the following: