Dell N1100-ON, Справочное руководство

Страница: 364 / 2332

Layer 2 Switching Commands
364
User Guidelines
This command has no user guidelines.
Example
(console)#show ipv6 dhcp snooping
DHCP snooping is Disabled
DHCP snooping source MAC verification is enabled
DHCP snooping is enabled on the following VLANs:
11 - 30, 40
Interface Trusted Log Invalid Pkts
--------- -------- ----------------
Gi1/0/1 Yes No
Gi1/0/2 No Yes
Gi1/0/3 No Yes
Gi1/0/4 No No
Gi1/0/6 No No
show ipv6 dhcp snooping binding
Use the show ipv6 dhcp snooping binding command to display the IPv6
DHCP snooping configuration
Syntax
show ipv6 dhcp snooping binding [{ static | dynamic }] [ interface interface-id
| port-channel port-channel-number] [ vlan vlan-id]
• static —Only show static entries.
• dynamic —Only show dynamic entries.
• interface-id—Limit the display to entries associated with physical
interface-id.
• vlan-id—Limit the display to entries associated with VLAN vlan-id.
• port-channel-number—Limit the display to entries associated with the
identified port channel.
Default Configuration
This command has no default configuration.