Dell N1100-ON, Справочное руководство

Страница: 308 / 2332

Layer 2 Switching Commands
308
1 1418.7715.47E8 Management CPU
1 2047.47BA.F696 Dynamic Gi2/0/29
1 B8CA.3AD5.DF1A Static Gi2/0/29
show port-security
Use the show ports security command to display port security (MAC locking)
configuration.
Syntax
show port-security
[ interface-id | all | dynamic interface-id | static interface-id
| violation interface-id ]
• interface-id —A physical or port channel interface identifier.
• all—Display information for all interfaces.
Default Configuration
Port security is disabled by default.
No port security MAC addresses are learned or configured by default.
The maximum static MAC address limit is 100 MAC addresses.
The maximum dynamic MAC address limit is 600 MAC addresses.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
Setting the dynamic limit to 0 causes all received packets with non-static or
sticky MAC addresses to be considered as violations.
This information is shown if no parameters are given:
Field Description
Admin Mode The configured global administrative status of port
MAC locking.