Dell N1100-ON, Справочное руководство

Страница: 2087 / 2332

Switch Management Commands
2087
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The following fields are displayed:
Example
console# show sflow 1 polling
Poller Receiver Poller
Data Source Index Interval
----------- ------- -------
Te1/0/1 1 0
show sflow sampling
Use the show sflow sampling command to display the sFlow sampling
instances created on the switch.
Syntax
show sflow rcvr-index sampling [{ gigabitethernet | tengigabitethernet |
fortygigabitethernet } interface-list]
• rcvr-index — The sFlow Receiver associated with the poller (Range: 1–
8).
• interface-list — The list of interfaces on which data is sampled.
Poller Data
Source
The sFlowDataSource (unit/slot/port) for this sFlow sampler. This
agent will support Physical ports only.
Receiver Index The sFlowReceiver associated with this sFlow counter poller.
Poller Interval
The number of seconds between successive samples of the counters
associated with this data source.