Dell N1100-ON, Справочное руководство

Страница: 2050 / 2332

Switch Management Commands
2050
User Guidelines
Debug output should be enabled with caution. Switch behavior may be
adversely affected by the additional processing load incurred from enabling
debug.
Example
console#debug ipv6 pimsm packet
debug isdp
Use the debug isdp command to trace ISDP packet reception and
transmission. The receive option traces only received ISDP packets and the
transmit option traces only transmitted ISDP packets. When neither keyword
is used in the command, then all ISDP packet traces are dumped. Vital
information such as source address, destination address, control packet type,
packet length, and the interface on which the packet is received or
transmitted is displayed on the console. Use the “no” form of this command
to disable ISDP tracing.
Syntax
debug isdp packet [r eceive | transmit ]
no debug isdp packet [r eceive | transmit ]
Default Configuration
Display of ISDP traces is disabled by default.
Command Mode
Privileged Exec mode.
User Guidelines
Debug output should be enabled with caution. Switch behavior may be
adversely affected by the additional processing load incurred from enabling
debug.
Example
console#debug isdp packet