Dell N1100-ON, Справочное руководство

Страница: 1330 / 2332

Layer 3 Routing Commands
1330
show bgp ipv6 neighbors advertised-routes
Use this command to display IPv6 routes advertised to a specific neighbor.
The format and field descriptions are the same as for show ip bgp neighbors
advertised-routes , except that the Network and Next Hop fields show IPv6
addresses. This command deprecates and replaces the show ipv6 bgp
neighbors advertised-routes command.
Syntax
show bgp ipv6 neighbors { ipv4-address | ipv6-address [ interface interface-id
] } advertised-routes
• ipv4-address—The IPv4 address of a BGP peer.
• ipv6-address [
interface interface-id]—The IPv6 address of a BGP peer. If
the peer address is an IPv6 link local address, the interface that defines the
scope of the link local address must be given.
• autodetect interface interface-id—(Optional) The routing interface on
which the neighbor’s link local IPv6 address is auto detected. The interface
ID must be a VLAN routing interface.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration sub-
modes
User Guidelines
The following fields are displayed.
Field Description
BGP table version Each time phase 2 of the BGP decision process runs to
select new BGP routes, this number is incremented
Local router ID The IP address of the local router.