Dell MXG061 Скачать руководство пользователя страница 20

Страница: 20 / 64

Video Card/Thermal-Cooling Assembly: Dell XPS M1710 Service Manual

file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/video.htm[2/21/2014 11:23:34 AM]

Back to Contents Page

Video Card/Thermal-Cooling Assembly

Dell™ XPS™ M1710 Service Manual

Removing the Video Card/Thermal-Cooling Assembly

Replacing the Video Card/Thermal-Cooling Assembly

Removing the Video Card/Thermal-Cooling Assembly

CAUTION:

Before you begin the following procedure, follow the safety instructions in the

Product

Information Guide

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching

an unpainted metal surface (such as the back panel) on the computer.

NOTICE:

To help prevent damage to the system board, remove the main battery (see

Before Working Inside Your

Computer

) before working inside the computer.

1. Follow the instructions in

Before Working Inside Your Computer

2. Remove the hinge cover (see

Removing the Hinge Cover

3. Remove the keyboard (see

Keyboard

4. Remove the display assembly (see

Removing the Display Assembly

5. Remove the palm rest (see

Removing the Palm Rest

NOTE:

Remove the video card/thermal-cooling assembly as a single unit. Do not separate the thermal-cooling

assembly from the video card.

6. Loosen the four captive screws on the video card/thermal-cooling assembly.

7. Lift the video card/thermal-cooling assembly from the system board.

NOTE:

The appearance of the video card/thermal-cooling assembly may vary, depending on your computer

configuration.

Содержание MXG061

































































Результаты поиска

Содержание MXG061

Отзывы:

Похожие инструкции для MXG061

Бренды по названию

Популярные бренды

Dell MXG061, Руководство по обслуживанию

Результаты поиска

Содержание MXG061

Отзывы:

Похожие инструкции для MXG061

Бренды по названию

Популярные бренды