Dell MR2217 Скачать руководство пользователя страница 15

Страница: 15 / 66

About

Your

Monitor |

Product Features

The

Dell MR2217

flat panel medical display has an active matrix, Thin-Film Transistor

(TFT), Liquid Crystal Display (LCD) and LED backlight. The monitor features include:

•

54.61 cm (21.5-inch) viewable area display (measured diagonally).
1920 x 1080 resolution, plus full-screen support for lower resolutions.

•

Wide viewing angle to allow viewing from a sitting or standing position, or while
moving from side-to-side.

•

Tilt, swivel, height, and rotate adjustment capabilities.

•

Removable stand and Video Electronics Standards Association (VESA™) 100 mm
mounting holes for flexible mounting solutions.

•

Digital connectivity with DisplayPort and HDMI.

•

Equipped with 1 USB upstream port and 2 USB downstream ports.

•

Plug and play capability if supported by your system.

•

On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.

•

Software and documentation media includes an Information File (INF), Image Color
Matching File (ICM), and product documentation.

•

Dell Display Manager Software included (comes in the CD shipped with the
monitor).

•

Security lock slot and cable clip.

•

Capability to switch from wide aspect to standard aspect ratio while maintaining
the image quality.

•

BFR/PVC/CFR-free (Halogen-free) excluding the external cables and power
adapter.

•

Meets NFPA 99 leakage current requirements.

•

Arsenic-Free glass and Mercury-Free for the panel only.

•

0.5 W standby power when in the sleep mode.

•

Energy Gauge shows the energy level being consumed by the monitor in real time.

•

Analog backlight dimming control for flicker free display.

•

DICOM (Digital Imaging and Communications in Medicine) part-14 GFDS for
accurate grayscale reproducibility. DICOM calibrated luminance at 180 cd/m².

•

FDA Class I and medical grade display.

•

Integrated backlight sensing for brightness stabilization.

•

Cable security and management.

•

10-bit LUT and color processing.

•

White housing for visible dried blood stains detection.

Содержание MR2217



































































Результаты поиска

Содержание MR2217

Отзывы:

Бренды по названию

Популярные бренды

Dell MR2217, Руководство пользователя

Результаты поиска

Содержание MR2217

Отзывы:

Бренды по названию

Популярные бренды