Dell Latitude LS, Руководство по обслуживанию

Страница: 22 / 49

support.dell.com Dell Latitude LS Portable Computers Service Manual 13
3. Separate the bezel from the display-assembly top cover.
The bezel is secured by slot openings that snap into the display-assembly
top cover. Carefully lift the inside edge of the bezel, working your way
around the inside perimeter, to unsnap and remove the bezel from the
display assembly.
Display Assembly Latch
Figure 10. Display Assembly Latch Removal
NOTICE: To avoid damaging the system board, you must remove the
main battery before you service the computer.
1. Remove the display assembly bezel.
2. Lift the display assembly latch of off the display-assembly top cover
(see Figure 10).
3. Slide the latch spring off of the post on the display-assembly top cover
(see Figure 10).
You may need to use a small flat-blade screwdriver to separate the latch
spring from the post.
To replace the display-assembly latch, perform the following steps:
1. Carefully place the latch spring over the post on the display-assembly top
cover.
You may need to use a small flat-blade screwdriver to place the spring over
the post. Hold the spring on the post with the screwdriver while
performing the next step.
2. Holding the latch, stretch the spring slightly and set the display-assembly
latch in place in the display assembly top cover.
3. Reinstall the bezel.
display assembly latch
latch spring
post
display assembly
top cover