Dell Latitude LM Скачать руководство пользователя страница 75

Страница: 75 / 87

4-38

Dell Latitude LM Systems Service Manual

Touch Pad

Figure 4-31. Touch Pad Removal

To remove the touch pad, follow these steps:

1. Remove the top assembly and turn it over.

See “Top Assembly” found earlier in this section.

2. Remove touch pad screws S11, S12, and S13.

Place the touch-pad button board to one side. The board has a flex cable that
attaches to the touch pad.

3. Remove the touch pad buttons.

Press down on the touch-pad button projections, and pull the touch pad but-
ton out of the recess on the front of the top assembly.

4. Remove touch-pad bracket screws S14 and S15.

Remove the touch pad bracket.

5. Remove the touch pad bracket and touch pad from the top assembly.

top
assembly

(screws S11–
S15 are 3 mm)

S11

S12

S13

S15

S14

touch-pad
button board

touch pad
bracket

touch pad

flex cable

touch-pad
cable connector

button (2)

3 mm

Содержание Latitude LM
























































































Результаты поиска

Содержание Latitude LM

Отзывы:

Dell Latitude LM, Руководство по обслуживанию, Страница: 75 / 87

Результаты поиска

Содержание Latitude LM

Отзывы: