Installing the Display-Hinge Cover
1.
Place the display-hinge cover and tighten the screws to secure the display-hinge cover to the computer.
2.
Install battery.
3.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Heatsink
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a. SD card
b. battery
c. base cover
d. mSATA
e. keyboard trim
f. keyboard
g. palmrest
h. display-hinge cover
i. display assembly
3.
Remove the screws that secure the heatsink to the computer.
4.
Perform the following steps as shown in the illustration:
a. Lift the heatsink from the computer [1].
b. Remove the heatsink from the computer [2].
Installing the Heatsink
1.
Place the heatsink into its original position on the computer.
2.
Tighten the screws to secure the heatsink to the computer.
27
