Installing the speakers
1. Place the speakers into the slots on the computer.
2. Route the speaker cable through the retention clips through the routing channel.
3. Connect the speaker cable to the connector on the system board.
4. Install the:
a.
b.
c.
d.
e.
f.
After working inside your computer
.
System board
Removing the system board
Before working inside your computer
.
2. Remove the:
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
3. Remove the SIM card tray from the computer.
4. To remove the system board:
a. Lift the latch and disconnect the speaker cable, touch pad and system board cable from the computer [1, 2, 3].
b. Disconnect the power connector port cable from the system board [4].
c. Remove the screws that secures system board to the computer [5].
d. Lift the system board from the computer [6].
Disassembly and reassembly
31
