Installing the optional finger print reader board
1. Insert the finger print reader board into the slot on the computer.
2. Connect the finger print reader cable to the finger print reader board.
3. Install the:
a.
b.
c.
d.
e.
f.
After working inside your system
.
LED board
Removing the LED board
Before working inside your computer
.
2. Remove the:
a.
b.
c.
d.
e.
f.
3. To remove the LED board:
a. Disconnect the LED board cable from the connector on the LED board [1, 2].
b. Remove the screw that secures the LED board to the computer [3].
c. Lift the LED board from the computer [4].
28
Disassembly and reassembly
