Starting the Dell Diagnostics From the Drivers and Utilities Media
Before running the Dell Diagnostics, enter system setup to review your computer's configuration information, and ensure that the device you want to test is
displayed in system setup and is active. For more information on using the system setup program, see the
Dell™ Technology Guide
on your computer or at
support.dell.com.
1.
Attach an external CD/DVD drive or media base if not already present.
2.
Insert the
Drivers and Utilities
media into the optical drive.
3.
Restart your computer.
4.
When the DELL logo appears, press <F12> immediately.
If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop, then shut down your
computer and try again.
5.
When the boot device list appears, use the up- or down- arrow keys to highlight
CD/DVD/CD-RW Drive
then press <Enter>.
6.
Press any key to confirm that you want to start from the CD/DVD.
If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop, then shut down your
computer and try again.
7.
Type
1
to
Run the 32 Bit Dell Diagnostics
.
8.
At the
Dell Diagnostics Menu
, type 1 to select
Dell 32-bit Diagnostics for Resource CD (graphical user interface)
.
9.
Press <Tab> to select
Test System
and then press <Enter>.
10.
11.
After all tests have completed, close the test window to return to the Dell Diagnostics Main Menu.
12.
Close the Main Menu window to exit the Dell Diagnostics and restart the computer.
13.
Remove the
Drivers and Utilities
media from the optical drive.
Dell Diagnostics Main Menu
After the Dell Diagnostics loads, the following menu appears:
Press <Tab> to select the test you want to run and then press <Enter>.
After
Test System
is selected, the following menu appears:
NOTE:
Keyboard failure may result when a key is held down for extended periods of time. To avoid possible keyboard failure, press and release
<F12> in even intervals to open the Boot Device Menu.
NOTE:
Using the one-time boot menu changes the boot sequence for the current boot only. Upon restart, the computer boots according to the
boot sequence specified in system setup.
NOTE:
It is recommended that you select
Test System
to run a complete test on your computer. Selecting
Test Memory
initiates the extended
memory test, which can take up to thirty minutes or more to complete. When the test completes, record the test results and then press any key to
return to the previous menu.
NOTE:
Write down any error codes and problem descriptions exactly as they appear and follow the instructions on the screen.
Option
Function
Test Memory Run the stand-alone memory test
Test System Run system diagnostics
Exit
Exit the diagnostics
NOTE:
It is recommended that you select
Test System
to run a complete test on your computer. Selecting
Test Memory
initiates the extended memory
test, which can take up to thirty minutes or more to complete. When the test completes, record the test results and then press any key to return to this
menu.
Содержание Latitude E4200
Страница 68: ...Back to Contents Page ...
