Dell Latitude D830 - Core 2 Duo Laptop Скачать руководство пользователя страница 1

Страница: 1 / 45

Dell™ Latitude™ D830 Service Manual

Before You Begin

Internal Card with Bluetooth

Wireless Technology

Hard Drive

Memory

FCM (Flash Cache Module)

Processor Thermal-Cooling Assembly

Pin Assignments for I/O Connectors

Notes, Notices, and Cautions

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc.

is strictly forbidden.

Trademarks used in this text:

Dell

, the

DELL

logo, and

Latitude

are trademarks of Dell Inc.;

Bluetooth

is a registered trademark owned by Bluetooth SIG, Inc. and is used by Dell

under license.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.

September 2009 Model PP04X Rev. A01

NOTE:

A NOTE indicates important information that helps you make better use of your computer.

NOTICE:

A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

CAUTION:

A CAUTION indicates a potential for property damage, personal injury, or death.

Содержание Latitude D830 - Core 2 Duo Laptop














































Результаты поиска

Содержание Latitude D830 - Core 2 Duo Laptop

Отзывы:

Похожие инструкции для Latitude D830 - Core 2 Duo Laptop

Бренды по названию

Популярные бренды

Dell Latitude D830 - Core 2 Duo Laptop, Руководство по обслуживанию

Результаты поиска

Содержание Latitude D830 - Core 2 Duo Laptop

Отзывы:

Похожие инструкции для Latitude D830 - Core 2 Duo Laptop

Бренды по названию

Популярные бренды