Dell Latitude CPi R Series, Руководство по обслуживанию

Страница: 34 / 45

Dell Latitude CPt C-Series/CPi R-Series Service Manual 25
5. Remove the left latch from the outside of the bottom case assembly by
carefully squeezing the snap tabs to unsnap the module latch assembly.
Keep pressure applied to the module latch assembly while unsnapping the
snap tabs to prevent the module latch assembly from coming loose from
the case. If the module latch assembly does come loose from the case:
a. Carefully reinsert the spring onto the plunger on the module latch, and
reinstall the module latch assembly into the holding features on the
inside of the case.
b. Ensure that the plunger is inserted in its respective hole, that the side
of the latch with the two bumps is facing the back of the case, and
that the surface with the wear ribs is facing the bottom of the case
(see Figure 17).
6. Snap in the new latch from the bottom of the base, making certain its snap
features are fully engaged on the inside of the case.
7. Ensure that the newly installed latch moves smoothly and freely when
pushed and released.
8. Repeat steps 1 through 3 for the latch on the right side.
)LJXUH /HIW 6OLGHU
bump side
wear ribs (2)