2. Tighten the five M2.0 x 2.0 screws to secure the keyboard to the keyboard tray.
3. Install the
.
Installing keyboard assembly
NOTE:
The keyboard and the keyboard tray together are called the keyboard assembly.
NOTE:
The keyboard has multiple snap points on the lattice side which must be pushed down firmly at the snap points in
order to secure and fit it to the replacement keyboard.
1. Align the keyboard assembly with the screw holders on the computer.
2. Tighten the M2.0 x 2.5 screws that secure the keyboard to the chassis.
3. Connect the keyboard cable, keyboard backlight cable, andtouchpad cable cable to the connectors on the touchpad buttons
board.
4. Install the:
a.
b.
c.
d.
e.
f.
g.
h.
After working inside your computer
.
Palm rest
Replacing palm rest
Before working inside your computer
.
2. Remove the:
a.
b.
c.
d.
e.
f.
g.
48
Disassembly and reassembly