3
To remove the NVMe SSD card:
a Loosen the M2.0 x 3.0 screws that secure SSD thermal bracket [1].
b Lift the thermal bracket from the SSD card [2,3].
c Slide and remove the SSD card from the slot [4].
Installing the NVMe SSD
1
Insert the NVMe SSD card into the connector.
2
Install the thermal bracket over the SSD card.
3
Tighten the M2.0 x 3.0 screws to secure the SSD thermal bracket.
4
Install the:
a
b
c
d
NOTE:
To install both cards if equipped .
5
Follow the procedure in
After working inside your computer
.
Tarjeta WLAN
Removing the WLAN card
1
Follow the procedure in
Before working inside your computer
.
2
Remove:
a
b
14
Extracción e instalación de componentes
