Dell Latitude 7380 Скачать руководство пользователя страница 69 | Manualshive

Страница: 69 / 74

background image

Virtualization support screen options

Option

Description

Virtualization

Allows you to enable or disable the Intel Virtualization Technology.

Enable Intel Virtualization Technology (default).

VT for Direct I/O

Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities
provided by Intel® Virtualization technology for direct I/O.

Enable VT for Direct I/O - enabled by default.

Trusted
Execution

This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional
hardware capabilities provided by Intel Trusted Execution Technology. The TPM Virtualization
Technology, and Virtualization technology for direct I/O must be enabled to use this feature.

Trusted Execution - disabled by default.

Wireless screen options

Option

Description

Wireless

Allows to set the wireless devices that can be controlled by the wireless technology. The options are:

●

WWAN

●

GPS (on WWAN Module)

●

WLAN/WiGig

●

Bluetooth

All the options are enabled by default.

NOTE:

For WLAN and WiGig enable or disable controls are tied together and they cannot be enabled

or disabled independently.

Wireless Device
Enable

Allows you to enable or disable the internal wireless devices.

●

WWAN/GPS

●

WLAN/WiGig

●

Bluetooth

All the options are enabled by default.

Maintenance screen options

Option

Description

Service Tag

Displays the Service Tag of your computer.

Asset Tag

Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default.

BIOS Downgrade

This controls flashing of the system firmware to previous revisions.

Data Wipe

This field allows users to erase the data securely from all internal storage devices. The following is the
device affected:

●

Internal M.2 SDD

BIOS Recovery

This field allows you to recover from certain corrupted BIOS conditions from a recover file on the user
primary hard drive or an external USB key.

●

BIOS Recovery from Hard Drive (enabled by default)

System setup

69

«
...
67
68
69
70
71
...
»

Содержание Latitude 7380











































































Отзывы:

Нет отзывов

Похожие инструкции для Latitude 7380

Vehicle-Mount Computer 8515

Бренд: Psion Teklogix Страницы: 190

SuperWorkstation 5038A-IL

Бренд: Supero Страницы: 122

Бренд: C&T Solution Страницы: 108

Бренд: M5Stack Страницы: 15

6862 - PC 300 PL

Бренд: IBM Страницы: 208

Бренд: Commodore Страницы: 23

Pavilion Slimline s5500 - Desktop PC

Бренд: Compaq Страницы: 36

Бренд: Atari Страницы: 16

Бренд: Wincomm Страницы: 58

TOUGHBOOK CF-19FHGAX M Series

Бренд: Panasonic Страницы: 90

Height Adjustable Standing Desk 4-Leg

Бренд: Uplift Desk Страницы: 7

Бренд: Toshiba Страницы: 47

Бренд: Vector Страницы: 32

Бренд: Portwell Страницы: 50

RY883AA#ABA - Compaq Presario - SR5002HM

Бренд: HP Страницы: 1

RY883AA#ABA - Compaq Presario - SR5002HM

Бренд: HP Страницы: 2

Envy Recline23 TouchSmart Beats SE All-in-One

Бренд: HP Страницы: 5

ENVY Phoenix 850

Бренд: HP Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды