Dell Latitude 7380 Скачать руководство пользователя страница 25

Страница: 25 / 74

2. Connect the battery cable to the connector on the system board.
3. Install the

base cover

4. Follow the procedures in

After working inside your computer

Heat sink

Removing heat sink assembly

Heat sink assembly consists of heat sink and the system fan.
1. Follow the procedure in

Before working inside your computer

2. Remove the

base cover

3. Disconnect the battery cable from the connector on the system board.
4. To remove the heat sink assembly:

NOTE:

To identify the number of screws, see

screw list

a. Disconnect the fan cable from the system board [1].

NOTE:

After removing the heat sink assembly, ensure to disconnect the fan cable.

b. Remove the M2.0 x 5.0 screws that secure the heat sink and the M2.0 x 3.0 screws that secure the fan to the system

board [2].

NOTE:

Remove the screws in the order of the callout numbers [1, 2, 3, 4] as indicated on the heat sink.

c. Lift the heat sink assembly from the system board [3].

Installing heat sink assembly

Heat sink assembly consists of heat sink and the system fan.

Disassembly and reassembly

Содержание Latitude 7380











































































Результаты поиска

Содержание Latitude 7380

Отзывы:

Похожие инструкции для Latitude 7380

Бренды по названию

Популярные бренды

Dell Latitude 7380, Руководство пользователя

Результаты поиска

Содержание Latitude 7380

Отзывы:

Похожие инструкции для Latitude 7380

Бренды по названию

Популярные бренды