Dell Latitude 7210 2-in-1, Руководство по обслуживанию

Страница: 32 / 89

4. Adhere the tape on the battery connector[2].
5. Install the:
a) SD card
b) SIM
6. Follow the procedure in After working inside your tablet .
Heat sink
Removing the heat sink assembly
Steps
1. Follow the procedure in Before working inside your tablet .
2. Remove the:
a) SD card
b) SIM
c) display panel
d) battery
3. To remove the heat-sink shield
a) Lift the left heat-sink shield [1] and right heat-sink shield [2] away from the heat-sink.
b) Unroute the WLAN card cables from the routing guides [2]..
Open the latch and disconnect the heat-sink fan cable from the connector on the system board [3]
NOTE: Peel the black tape / copper tape that secure the IR camera cable for model shipped with IR camera
(optional).
32 Disassembly and reassembly