Installing the heat sink assembly for Touch
1
Place the heat sink assembly on the system board and align the heat sink with the screw holders.
2
Tighten the M2x3 screws (4) to secure the heat sink assembly to the system board.
NOTE:
Tighten the screws on the system board in the order of the callout numbers [1, 2, 3, 4].
3
Connect the heat sink assembly to the connector on the system board.
4
Install the:
a
b
5
Follow the procedure in
After working inside your computer
.
System fan
Removing the system fan for Non-Touch
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
3
To remove the system fan:
a Disconnect the system fan cable from the connector on the system board [1].
b Remove the M2x3 screws (2) that secures the system fan to the system board [2]
NOTE:
Some system may have a integrated heat sink and system fan.
c Lift the system fan away from the system board [3].
32
Disassembly and reassembly
Содержание Latitude 5591
Страница 1: ...Latitude 5591 Service Manual Regulatory Model P60F Regulatory Type P60F002 ...
Страница 28: ...e Turn over the system and open the laptop in front view mode 28 Disassembly and reassembly ...
Страница 40: ...5 Remove the M2x3 screws 3 and lift the system board away from the computer 1 2 40 Disassembly and reassembly ...
Страница 50: ...7 Slide the display assembly away from the system base 50 Disassembly and reassembly ...
