4
To remove the display panel:
a Peel the conductive tape [1].
b Remove the adhesive strip that secures the display cable [2].
c Lift the latch and disconnect the display cable from the connector on the display panel [3] [4].
d Remove the display panel.
Installing display panel
1
Connect the display cable to the connector and affix the adhesive strip.
2
Affix the conductive tape to secure the display cable.
3
Replace the display panel to align with the screw holders on the display assembly.
4
Replace the four M2x3 screws to secure the display panel to the display assembly.
5
Install the:
a
b
c
d
e
f
g
6
Follow the procedure in
After working inside your computer
.
48
Removing and installing components
Содержание Latitude 5490
Страница 1: ...Latitude 5490 Owner s Manual Regulatory Model P72G Regulatory Type P72G002 ...
Страница 13: ...Removing and installing components 13 ...
Страница 25: ...Removing and installing components 25 ...
Страница 44: ...c Lift the display assembly from the computer 44 Removing and installing components ...