Dell Latitude 5490, Руководство пользователя

Страница: 45 / 89

Installing display assembly
1 Place the chassis on the edge of a plane surface.
2 Align the display assembly to align with the screw holders on the system.
3 Replace the two screws that secures the display assembly.
4 Close the display.
5 Replace the two screws that secures the display assembly.
6 Replace the screw to secure the display cable to the system.
7 Connect the display cable to the connector on the system board.
8 Place the metal bracket to secure the display cable.
9 Replace the (M2x3) screws to secure the metal bracket to the system.
10 Route the WLAN and WWAN cables through the routing channels.
11 Install the:
a hinge cover
b WWAN card (optional)
c WLAN card
d hinge cover
e battery
f base cover
12 Follow the procedure in After working inside your computer .
Removing and installing components 45