Installing hard drive
1
Insert the hard drive into the slot on the system.
2
Replace the four M2 x 2.7+2.7 screws to secure the hard drive to the system.
3
Connect the hard drive cable to the connector on the system board.
4
Install the :
a
b
5
Follow the procedures in
After working inside your system
Coin cell battery
Removing the coin cell battery
1
Follow the procedure in
Before working inside your computer
.
2
Remove the :
a
b
3
To remove the coin cell battery:
a Disconnect the coin cell battery cable from the connector on the system board [1].
b Lift the coin cell battery to release from the adhesive and lift it away from the system board [2].
18
Removing and installing components
Содержание Latitude 5490
Страница 1: ...Latitude 5490 Owner s Manual Regulatory Model P72G Regulatory Type P72G002 ...
Страница 13: ...Removing and installing components 13 ...
Страница 25: ...Removing and installing components 25 ...
Страница 44: ...c Lift the display assembly from the computer 44 Removing and installing components ...