Dell Latitude 5490, Руководство пользователя

Страница: 41 / 89

Installing display hinge cover
1 Place the display hinge cover on the display hinge.
2 Replace the M2x3 screw to secure the display hinge cover to the display hinge.
3 Repeat step 1 and step 2 to install the other display hinge cover.
4 Connect the battery cable to its connector on the system board.
5 Install the:
a base cover
6 Follow the procedure in After working inside your computer .
Display assembly
Removing display assembly
1 Follow the procedure in Before working inside your computer .
2 Remove the:
a base cover
b battery
c WLAN card
d WWAN card (optional)
e display hinge cover
3 To disconnect the display cable:
a Release the WLAN and WWAN cables from the routing channels [1].
b Remove the two (M2x3) screws that secure the display cable bracket in place [2].
c Remove the display cable bracket that secures the display cable from the system [3].
d Disconnect the display cables from the connector on the system board [4,5].
e Remove the screw that secures the tape which in turn secures the display cable to the system [6].
Removing and installing components 41