Installing display assembly
1
Place the display assembly to align with the screw holders on the computer.
2
Tighten the M1.6xL2 screws to secure the display assembly to the computer.
3
Turn over the computer
4
Connect the display cable to the connector.
5
Place the metal bracket over the connector and tighten the screw to secure the display cable to the computer.
6
Install the:
a
b
c
d
e
7
Follow the procedure in
After working inside your computer
System board
Removing system board
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
c
d
e
f
g
h
3
Remove the screw that secures the metal bracket of the display cable [1] and remove it from the system [2]. Then, remove the eDP
cable from the system board [3] and disconnect the coin cell battery cable from its connector on the system board [4].
Removing and installing components
31
Содержание Latitude 3380
Страница 1: ...Latitude 3380 Owner s Manual Regulatory Model P80G Regulatory Type P80G001 ...
Страница 6: ...7 Contacting Dell 64 6 Contents ...
Страница 13: ...5 Gently pry up the lower edge of the keyboard from the computer Removing and installing components 13 ...
Страница 14: ...6 Remove the keyboard away from the computer 14 Removing and installing components ...
